http://www.che.com Chemical Engineering en-us 2013 Wed, 19 Jun 2013 14:17:21 EDT The CS10 Clean Steam Separator with enhanced surface finish has been engineered to overcome problems associated with wet steam and ensures the correct quality of steam is supplied to the point of use... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/10274.html Fri, 1 Mar 2013 0:00:00 EST The LEX3N-TZ is a high-performance, temperature-control trap for steam service that has a built-in scale-removal function. An auger is built into the steam trap to remove scale and solids buildup from the valve seat... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/10057.html Tue, 1 Jan 2013 0:00:00 EST Today’s chemical processors must cope with rising labor costs, increasing global competition, escalating fuel costs and more-stringent safety and environmental regulations. To improve productivity and reduce costs in today’s competitive environment, many facilities are... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/9765.html Mon, 1 Oct 2012 0:00:00 EDT There is a temptation that steam design engineers find difficult to resist — to put condensate from high-pressure (HP) steam mains directly into the low-pressure (LP), pumped condensate-return (CR) mains. After all, the CR main is so convenient — it is generally laid right next to the outgoing... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/9551.html Wed, 1 Aug 2012 0:00:00 EDT TLV This tracing manifold, trap station and condensate manifold system using the new M Series compact and high-performance steam tracing and condensate systems (photo) reduces design and specification time on tracing projects, says the... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/7569.html Mon, 28 Mar 2011 0:00:00 EDT Steam traps of the UNA 1 range combine the technical properties of a reliable compact-type float trap with minimum dimensions. Used wherever condensate has to be... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/7571.html Mon, 28 Mar 2011 0:00:00 EDT The patented Stainless Steel Trap Valve Station (TVS) is ideally suited for any steam piping installation. Since most of the piping joints needed to properly install a steam trap and shut-off... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/7574.html Mon, 28 Mar 2011 0:00:00 EDT Spirax Sarco Inc., (Blythewood, S.C.; www.spirax.com) has released the TD120M Thermo-dynamic steam trap, which is engineered for pressure ratings of up to 3,190 psig. With its maintainable disc and seat, this steam trap can be serviced in-line — a benefit to... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/6132.html Tue, 2 Nov 2010 0:00:00 EDT Steam tracer lines are designed to maintain the fluid in a primary pipe at a designated uniform temperature. In most cases, these tracer lines are used outdoors, which makes ambient weather conditions a critical consideration. The primary purpose of steam traps on tracer lines is to retain the steam until... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/5489.html Mon, 1 Mar 2010 0:00:00 EST In today’s typical process plants, preventing steam loss and improving condensate return are key opportunities to make a process more energy efficient.... http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/steam_traps/4647.html Wed, 1 Apr 2009 0:00:00 EDT