Chemical Engineering
AccountGuest Edition My Account My Che.com Log In

Archives :: Software, Automation & Control :: Instrumentation, Automation & Control :: Flow Measurement & Control

Displaying 121 - 140 of 146 stories.
March 28, 2011
    Turck    The new FM (flow module) family (photo) consists of six modules: three for use in Ex areas and three for use outside Ex areas. The modules are implemented into the approved IM DIN rail rack and...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/New-signal-processors-for-flowmeters_7669.html
March 28, 2011
The eControl 8611 is a high-performance universal controller for flowrate, pressure, temperature, pH, conductivity and ratio between fluid and gas flow. It can be commissioned quickly and covers a wide range of different applications...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/This-controller-offers-trouble-free-commissioning_7676.html
January 6, 2011
ABB (Houston; www.abb.com) has successfully completed Shanghai Institute of Measurement and Test Technology (SIMT) approval of its large flow-calibration rig at its instrumentation factory in Shanghai, China. SIMT is accepted by key international standards bodies as a mutually recognized calibration certification in accordance with the International Laboratory Accreditation Cooperation (ILAC), enabling...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/ABBs-flow-calibration-rig-in-China-certified-to-international-standards_6309.html
November 1, 2010
When automating fluid handling processes, it is critical to ensure that you are using the best type of pump for the process, and to understand how to control the type of pump you are using. The two major classes of process pumps — centrifugal and rotary positive displacement — require completely different control techniques. It is important to understand each pump type’s limitations, and...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Process-Pump-Control_6112.html
April 1, 2010
  Trimec Flowrate totalizer simplifies the sums Specifically designed for computing and displaying flowrates and totals from flowmeters with pulse, sine-wave or frequency outputs, the RT20 Rate Totalizer (photo) can be battery or externally powered and features a large six-digit LCD total, eight-digit cumulative totalizer and five-digit rate display. The instrument displays resettable (batch) total...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Focus-on-Flow-Measurement_5564.html
January 1, 2010
Typical wastewater-treatment plants (WWTP) — both industrial and municipal — consume large amounts of energy, which can represent 50% or more of the facility’s variable operating and maintenance costs. Most employ biological processes that rely on energy-intensive aeration systems whose energy consumption is approximately 0.5 kWh per m3 of effluent treated. This article discusses a...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Wastewater-Treatment-Energy-Conservation-Opportunities_5404.html
December 4, 2009
The RNS and RWS Series flowmeters are designed to measure non-condensing steam and saturated process steam at pressures of up to 150 psi in energy-related applications. Both series types have no...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Measure-non-condensing-steam-with-these-flowmeters_5343.html
October 1, 2009
Thermal mass flowmeters provide advantages over other options for metering the consumption of natural gas by individual combustion units throughout the facilityWith today’s increased emphasis on strategic energy management, many throughout the chemical process industries (CPI) and elsewhere are attempting to obtain better information on the natural gas consumption in their facilities. While...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Energy-EfficiencyTracking-Natural-Gas-With-Flowmeters_5160.html
August 1, 2009
Most engineers know what viscosity is, but may have trouble explaining it. To be brief, viscosity is resistance to flow. For handlers of all materials that flow, either while being processed or in an end-use, it is important to think about the materials’ flow characteristics. The bottom line is to come up with ways to measure viscosity so that you can quantify whether a material will flow the way it...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Viscosity-The-Basics_4977.html
July 1, 2009
When a flowmeter is needed, the selection process should include studying the characteristics of respective measurement technologies and analyzing the advantages/disadvantages for different plant environments. This effort will help ensure that a meter with the right performance and reliability, for a particular installation, is selected. Some of the most common industrial flowmeter designs are described...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Flowmeter-Selection_4924.html
June 1, 2009
The whole-product-lifecycle approach presented here encompasses more than basic selection Typical discussions of flowmeter selection address specifications, technologies, accuracies and performance, but there are many other steps that are not normally considered. This article focuses on these often overlooked criteria, which inevitably have far-reaching and costly implications over the life of the...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Beyond-Flowmeter-Selection-Consider-Some-of-the-Most-Overlooked-Criteria_4818.html
April 1, 2009
ABB Instrumentation (Warminster, Pa.; www.abb.com/instrumentation) has cut the cost of installing orifice-plate flowmeters by up to half with the launch of its OriMaster compact orifice DP flowmeter. The latest in the company’s FlowMaster range, the OriMaster comes fully factory configured and pressure tested, solving many of the problems...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Cut-installation-costs-in-half-with-this-orifice-flowmeter_4678.html
February 13, 2009
With the new Fluxus F601 ultrasonic flowmeter, a reliable flow measurement can be obtained in a few minutes. No zeroing procedure is necessary since calibration data and transducer parameters are saved in a transducer internal...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Measure-flow-with-only-two-transducer-pairs-over-a-diameter_4537.html
February 12, 2009
Max-Trak Model 180 Industrial Mass Flowmeters and Controllers are now available with 316-stainless-steel (ANSI or DIN) flange mounting for gas flowrates up to 1,000 L/min with pipe sizes up to 1 in. The major design...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/These-mass-flowmeters-are-multi-gas-capable_4548.html
February 1, 2009
This unit offers measurements for low flows in the milliliter range The SLQ-HC60 (photo) fills a gap in the existing range of products for precise measurement in the low flowrate range, below 100 mL/min. This water-resistant meter operates without moving parts and can detect bubbles in the microliter range as well. The unit requires a supply voltage of 24 V and provides a 0 – 10-V analog output...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Focus-on-Flow-Measurement-and-Control_4498.html
October 15, 2008
  The perfect valve to control your process has been selected. The valve will pass your maximum flow. Everything is great, right? In some cases digging a little deeper might help. The control valve usually should not be the...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Feature-Report-Part-1-Using-Installed-Gain-to-Improve-Valve-Selection_4239.html
July 15, 2008
    According to experts in flow measurement, any chemical processors seeking to optimize its processes in an effort to offset the rising prices of natural gas, electricity and raw materials may want to look at improving measurement and control via the added capabilities of modern flow technologies. Increasing productivity and process optimization very often involves system automation, says Jens...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Go-With-the-Flow_4002.html
June 15, 2008
In many plants that batch-blend bulk products, weigh batching is a manual, time-consuming operation in which ingredients are weighed individually before being discharged to a blender or some other process vessel. A significant number of such plants could benefit from the installation of an automated weigh-batching system. For small as well as large operations, an automated weigh-batching system can pay for...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Solids-Processing-Automating-Your-Weigh-Batching-System_3953.html
February 28, 2008
No manufacturer can calibrate flowmeters more accurately than Endress+Hauser (E+H) Flowtec AG (Reinach, Switzerland; www.endress.com): the company’s new calibration facility sets standards worldwide, the manufacturer claims. “It puts us in a position to satisfy even the highest customer requirements without any compromise whatsoever,” said CEO Dr. Gerhard Jost at the ceremony marking the...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/E+H-Flowtec-invests-in-new-calibration-facility_3702.html
February 15, 2008
A durable flowmeter for remote applications outdoors A thermal-dispersion, mass-flow sensing technology, the ST50 Flow Meter Series (photo) boasts ±1% accuracy (repeatability ±0.5%) for 2 – 24-in. line sizes and a built-in temperature compensation for reliable measurement over a 40 – 100°F temperature range. There is almost no pressure-drop, according to the firm. The ST50...
http://www.che.com/software_automation_and_control/instrumentation_automation_and_control/flow_measurement_and_control/Focus-on-Flowmeters_3666.html
Pages: « Previous  1 2 3 4 5 6 [7] 8 Next »

Get more from Che.com
Get email updates in your inbox

 

Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 26,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors


Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now



We also offer the following subgroup for more targeted discussions:

Tools
Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
X
To access this area, please log in or create an account.
Username:
Password:
Forgot your password?
Request it now.
Processing...
Live chat by BoldChat