Offshore Communications
AccountGuest Edition My Account My Che.com Log In

Archives :: Processing & Handling :: Thermal & Energy Management

Displaying 81 - 100 of 417 stories.
May 1, 2011
A new, three-ton chiller developed by this company is based on an absorption-cycle process with an aqueous ammonia solution as the working fluid. It is intended for...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/air_conditioning_and_refrigeration/This-waste-heat-chiller-is-for-mobile-applications_7912.html
May 1, 2011
CombustionONE is an integrated solution for managing and controlling combustion-based processes. The system is designed to improve...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Better-control-for-combustion-equipment-with-this-system_7918.html
May 1, 2011
Motorists filling up at U.S. gasoline stations these days may think that petroleum refiners are making good profits, but it depends on where the station gets its fuel. The industry is plagued by overcapacity and is concerned about government regulations that call for greater use of renewable fuels and tougher pollution control. The National Petrochemical & Refiners Assn. (NPRA, Washington, D.C....
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/fuels/Petroleum-refining-in-the-spotlight_7943.html
May 1, 2011
Suitable for use with any of this company’s range of explosion-proof, electrical heaters, the new generation Smart Controller 2.0 features fieldbus networking, extensive monitoring and diagnostic routines, programmable temperature ramping...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/kilns_ovens_and_furnaces/A-smart-controller-for-explosion-proof-heaters_7975.html
May 1, 2011
Gas turbines are widely used throughout the chemical process industries (CPI) — especially in petroleum refineries and petrochemical facilities — to provide both mechanical-drive and power-generation capabilities. Presented below are a variety of recommendations related to the selection and arrangement of gas turbines and auxiliaries, performance testing, and proper operation and maintenance of...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/power_generation_and_transmission/Specifying-Gas-Turbines_7988.html
April 27, 2011
GEA PHE Systems The new EcoFlex CDH heat-exchanger frame range features frame plates that have been considerably reduced in thickness. The cross section reduction in the clamping bolts has been compensated for by a greater...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/heat_exchangers_condensers_and_coolers/Plate-heat-exchangers-with-thinner-frames_7955.html
April 13, 2011
The Dow Chemical Co. (Midlands, Mich.; www.dow.com) has been recognized for its excellence in energy efficiency by the U.S. Department of Energy (DOE; Washington, D.C.; www.energy.gov). The DOE awarded two Superior Energy Performance certifications to the company for achievements in energy efficiency at its Texas City Operations facility. The Superior Energy Performance program is a new American National...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/DOE-kudos-for-Dow_7878.html
April 12, 2011
Jacobs Engineering Group Inc. (Pasadena, Calif; www.jacobs.com) announced today that the 6.5-MW cogeneration facility it designed and built for Oregon State University (OSU) has been awarded the Leadership in Energy and Environmental Design (LEED) Platinum certification. This rating is the highest achievable level of LEED certification by the U.S. Green Building Council, making the OSU Energy Center the...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/power_generation_and_transmission/Jacobs-First-LEED-Platinum-certified-power-plant_7875.html
April 1, 2011
The ever important aim of energy efficiency in the chemical process industries (CPI) is brought closer to its target by the practice of energy recovery in heat exchanger networks (HENs). When heat exchangers are designed to work together to exchange heat between hot and cold streams, the required utilities are effectively reduced. The HEN designer usually applies the assumptions of fixed operating...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/heat_exchangers_condensers_and_coolers/Flexible-Heat-Exchanger-Networks_7747.html
March 28, 2011
The 3D-file compatible Tracer Lynx heat-management-system (HMS) software interfaces with industry standard IDF and PCF files allowing HMS designers to utilize the master model data from clients to create 3D modeled plant...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/Create-3D-Models-from-Heat-Management-Data_6599.html
March 28, 2011
This firm is a recognized worldwide leader in the field of industrial steam system engineering. Staffed by an experienced engineering team, the firm is uniquely focused toward assisting clients in the steam system...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/Steam-system-engineering-and-best-practices_7573.html
March 28, 2011
Zeppelin Systems The Horizontal Cooler EFF (photo) delivers efficient cooling due to a newly designed vessel system and a newly developed, cooled mixing tool with large surface area. The Thermplate mixing vessel...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/This-cooler-features-a-new-vessel-and-a-cooled-mixing-tool_7727.html
March 28, 2011
In order to monitor pure steam quality in sterile plants in the pharmaceutical, food and beverage industries, samples are regularly taken from the steam ring mains and analyzed for contamination in the laboratory. This firm has...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Automated-Condensate-Sampler-Eliminates-Personnel-Hazards_6518.html
March 28, 2011
The Lancom 200 (photo) was developed specifically for oil- and coal-fired boiler systems that require periodic monitoring of the sulfuric acid dewpoint temperature to maintain boiler efficiency...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Maximize-Boiler-Efficiency-with-this-H-2-SO-4-Dewpoint-Monitor_6603.html
March 28, 2011
The Lancom 200 was developed specifically for oil- and coal-fired boiler systems that require periodic monitoring of the sulfuric acid dewpoint temperature to maintain boiler efficiency...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Maximize-Boiler-Efficiency-with-this-Dewpoint-Monitor_6613.html
March 28, 2011
The planning, production and installation of high-pressure condensate systems used to be very complicated, but this firm has developed a compact module. The CSM-CC high-pressure condensate service module (photo) should be...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Save-Fuel-and-Water-with-this-Boiler-Condensate-Module_6775.html
March 28, 2011
The new digital temperature controller DPC III (photo) is optimally matched to trace-heating applications. It monitors measuring circuits on breaks, interruptions and short circuits of the sensor as well as on...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Temperature-monitoring-for-trace-heating-applications_6859.html
March 28, 2011
This online conductivity sensor for industrial boilers can measure directly in the blowdown line without sample cooling — saving on installation and operating costs. It enables continuous automatic blowdown control, which minimizes corrosion and scaling to a...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Get-industrial-boiler-measurements-for-consistent-blowdown-control_6988.html
March 28, 2011
The Universal Modular Boiler U-MB (photo) steam-boiler series uses the shell structure with three-pass technology in the performance range of up to 2,000 kg/h. The boiler consists of several modules that are selected...
http://www.che.com/processing_and_handling/thermal_and_energy_mgmt/boilers_and_steam_handling/Match-the-needed-modules-to-meet-your-boiler-requirements_7035.html
Pages: « Previous  1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 Next »

Get more from Che.com
Get email updates in your inbox

 

Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 22,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors


Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now



We also offer the following subgroup for more targeted discussions:

Tools
Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
X
To access this area, please log in or create an account.
Username:
Password:
Forgot your password?
Request it now.
Processing...