Offshore Communications
AccountGuest Edition My Account My Che.com Log In

Archives :: Processing & Handling :: Solids Handling :: Blending

Displaying 1 - 16 of 16 stories.
September 1, 2013
Mixing and blending of bulk solids is a common processing step in many industries. For example, in pharmaceutical manufacturing of solid dosage formulations (tablets or capsules), small amounts of a powdered active drug are carefully blended with excipients, such as sugar, starch, cellulose, lactose and lubricants. With foods, many powder-form consumer products result from custom mixed batches; consider...
http://www.che.com/processing_and_handling/solids_handling/blending/Fundamentals-of-Bulk-Solids-Mixing-and-Blending_10946.html
October 1, 2012
Blending and segregation are two opposite and competing processes in solids handling that ideally fit the expression “two sides of the same coin.” But, if you think about it, coins have three sides and sampling completes the idiomatic expression perfectly. Blending is a necessary and essential process operation widely employed in many industries and materials, from nano-scale powders to...
http://www.che.com/processing_and_handling/solids_handling/blending/Blending-Sampling-and-Segregation_9786.html
April 1, 2012
The 42 NSD-1S is a new multipurpose ribbon blender equipped with interchangeable double-ribbon and paddle agitators. With a maximum working capacity of 1 ft3, the 42 NSD-1S is ideal for most laboratory and pilot-scale blending...
http://www.che.com/processing_and_handling/solids_handling/blending/Agitators-are-interchangeable-on-this-pilot-scale-blender_9193.html
September 1, 2011
  Over 1,000 exhibitors from all over the world will fill six halls at the Nuremberg Fairground for Powtech/TechnoPharm 2011 (October 11–13). Held every 18 months, Powtech — the International Trade Fair for Mechanical Processing Technologies and Instrumentation — is the meeting place for representatives of many sectors of the chemical process industries (CPI), including chemicals and...
http://www.che.com/processing_and_handling/solids_handling/blending/Powtech-2011-Show-Preview_8436.html
March 28, 2011
Dinnissen The new Pegasus Mixer (photo) is capable of adding up to 18 different liquids — very precisely and in all possible types of combinations and quantities — to dry materials, such as powders, granules and granulates. These...
http://www.che.com/processing_and_handling/solids_handling/blending/Precisely-mix-a-large-number-of-ingredients-with-this-unit_7182.html
March 28, 2011
Vibra Screw The Vibra Blender (photo) uses a unique combination of a rotating paddle and material fluidization to blend dry solids with the ease of liquids...
http://www.che.com/processing_and_handling/solids_handling/blending/Mix-solids-as-if-they-were-fluids-with-this-blender_7356.html
March 28, 2011
This company’s new square bin blender can be configured to blend square-shaped bins of any design, such as those used in...
http://www.che.com/processing_and_handling/solids_handling/blending/This-square-bin-blender-accommodates-common-bins_7469.html
March 28, 2011
This firm has developed and demonstrated a two-step process — using its kneader technology — for the direct devolatilization of temperature-sensitive elastomer-cement...
http://www.che.com/processing_and_handling/solids_handling/blending/This-devolatization-process-slashes-energy-and-water-use_7601.html
March 28, 2011
Kinematica The Megatron MT-VP powder dispersing/induction machine (photo) generates strong suction that prevents formation of lumps during the powder induction and...
http://www.che.com/processing_and_handling/solids_handling/blending/Avoid-lumpy-powder-dispersion-with-this-machine_7631.html
October 1, 2010
These days, there seem to be more reasons than ever to change feedstocks throughout the chemical process industries (CPI). Whether environmental, or more directly based on financial and market drivers, big benefits usually require big changes. This is especially true in switching to many renewable feedstocks, which either add or compound challenges related to processing solids. When Columbia Forest...
http://www.che.com/processing_and_handling/solids_handling/blending/Lessons-in-Feedstock-Change_6051.html
January 1, 2009
Portable mixers for pilot plant and small-scale production processing The PB Series pharmaceutical mixers (photo) feature a lightweight frame motor with a right-angle drive, 316 stainless-steel wetted parts, dry running mechanical shaft seal with CIP (clean in place) capabilities and vibration-free operation. Easily tailored to user requirements, the mixers can be configured with shafts up to 48-in. long...
http://www.che.com/processing_and_handling/solids_handling/blending/Focus-on-Mixing-and-Blending_4448.html
July 15, 2008
The incorporation of floating solids into liquids is a common challenge throughout the chemical process industries (CPI) in operations ranging from polymerization reactions to fermentation processes and water treatment. Yet, it has received much less attention in comparison to processes involving heavy solids that tend to settle. Both established and recently proven design recommendations for incorporating...
http://www.che.com/processing_and_handling/solids_handling/blending/Feature-Report-Incorporate-Floating-Solids-Into-Liquids_4011.html
May 15, 2008
A. Alexander and F. Muzzio, Rutgers University Proper blender selection can improve the mixing of bulk solids. Be sure to consider post-blending segregation problems Mixing and blending of bulk solids occurs frequently in many industrial processes. Though small-scale mixing and blending functions were in use back in the early days of man (for example, mixing flour, salt, yeast and water to make bread)...
http://www.che.com/processing_and_handling/solids_handling/blending/Solids-Processing-Blender-Selection-And-Avoidance-of-Post-Blender-Segregation_3867.html
April 28, 2008
Several manufacturing procedures for chemical, cosmetic, pharmaceutical or food products distribute powder-like solids during the liquid or pasty phases of operations. The systems usually used for these operations require the injection of powders in an agitation tank. Dispersion is often performed by the same tool (located on the bottom of the tank) as the one that insures (if required) the emulsion of...
http://www.che.com/processing_and_handling/solids_handling/blending/Vacuum-Injection-of-Powders-in-the-Center-of-the-Emulsifier_3834.html
December 15, 2007
At the Chem Show last month (New York; Oct. 30 – Nov. 1), Resodyn Acoustic Mixers Inc. (Butte, Mont.; edlinks.che.com/6902-531) demonstrated its new, impeller-free mixing technology, which induces microscale turbulence through the propagation of acoustic waves. Dubbed ResonantAcoustic Mixing (RAM), the now commercially available process promises solutions for many of the complications associated with...
http://www.che.com/processing_and_handling/solids_handling/blending/Chementator-Resodyn-Unveils-Entirely-New-Mixing-Technology-_3549.html

Get more from Che.com
Get email updates in your inbox

 

Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 21,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors


Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now



We also offer the following subgroup for more targeted discussions:

Tools
Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
X
To access this area, please log in or create an account.
Username:
Password:
Forgot your password?
Request it now.
Processing...