Offshore Communications
AccountGuest Edition My Account My Che.com Log In

Archives :: Processing & Handling :: Liquid, Gas and Air Handling :: Piping & tubing

Displaying 121 - 133 of 133 stories.
March 1, 2007
  Pipe flanges are used to mechanically connect pipe sections to other pipe sections, inline components, and equipment. Flanges also allow pipe to be assembled and disassembled without cutting or welding, which eliminates the need for those two operations when dismantling is required. In providing a breakable joint, however, flanges unfortunately provide a potential leak path for the process fluid...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Piping-Design-Part-2-Flanges_3131.html
March 1, 2007
Until now, creating a set of "as-built" plant drawings meant either laser-scanning the outline of an entire piping system, or measuring all the components manually. By paring Leica Geosystem's in-field-to-model laser technology with Coade's CADWorx Plant Design Suite, Coade, Inc. (Houston, Tex.; edlinks.che.com/6893-534) has reduced the time required by more than 50%, says Vornel Walker, Coade's manager...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Create-as-built-drawings-in-half-the-time_3215.html
February 1, 2007
    This is the first in a series of articles that will cover a wide range of piping topics. The topics will cross process-industry lines, pertaining to, for example, the chemical, petroleum-refining, pulp-and-paper and pharmaceutical and other industries.The main intent of these articles to address questions and misunderstandings as they relate to use of piping on a general basis.   Typical...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Piping-for-Process-Plants-Part-1-The-Basics_3141.html
January 1, 2007
Two specimens made from Basell Corp.’s Hostalene GM5010 high-density polyethylene (HDPE) that were installed in October 1956 are still in service, according to Ulrich Schulte, head of the application and technical service for Basell’s Pipe...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Pipe-passes-fifty-year-test_3188.html
December 1, 2006
    Reinforced PVC makes a kink-free hose Kink- and crush-resistant Vardex hose (photo) for both pressure and vacuum applications is now available from this manufacturer. Made of clear PVC with steel wire reinforcement, Vardex is suitable for either fluid or air transfer. Applications include chemical lines, material handling, cleaning equipment, water feeds and discharge, vacuum lines, shop...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Pipe-and-Fittings_2838.html
October 1, 2006
    Since its introduction to the market in 1959, chlorinated polyvinyl chloride (better known as CPVC) has proven suitable for use in a wide variety of chemical process environments. Because it is inert to most mineral acids, bases, salts and aliphatic hydrocarbons, it offers a more reliable, long-term performance than many other materials, including metals and most non-metallic alternatives. In...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Specifying-CPVC-In-Chemical-Process-Environments_2822.html
August 1, 2006
Mitsubishi Heavy Industries Co. (MHI; Mihara, Japan; edlinks.che.com/6515-531) has developed an integrated piping-and-instrument system, called M-iPIS, which makes small, complex piping systems from a single plate block. Analogous to the manufacturing of integrated circuit boards, M-iPIS realizes not only cost and space savings, but also produces a gas-tight system with rapid heating and cooling...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/A-completely-new-way-to-make-reliable-space-saving-piping-systems_2975.html
July 1, 2006
Although polymer-based piping systems have been used in the chemical process industries (CPI) for decades, the global market share is only around 10%, says Stephan Schuessler, head of technology and R&D at Georg Fischer DEKA GmbH (GF DEKA; Dautphetal, Germany; edlinks.che.com/6514-537). The main reason for the low acceptance of polymer versus metallic materials is because polymers are still...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Plastic-pipe-proves-itself-after-three-years-of-service_2971.html
May 1, 2006
    There are several reasons why composite fiberglass-reinforced-plastic (FRP) pipe has been replacing conventional pipe, and why this still relatively new material (see box, p. 46) should be kept in mind whenever piping is being specified for a new or a revamp project. Engineers involved with specifying or using FRP pipe should have a clear understanding of its nature and properties. A good...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Dont-Overlook-Composite-FRP-Pipe_2799.html
March 1, 2006
    Engineers often need to predict the cost of piping and pipefitting associated with a process unit. Even though detailed prices are available, finding and organizing them takes time and costs money. For those needing a quick method of approximation (such as for a pre-design estimate), a short-cut piping cost method is presented in this article. For convenience and compactness, the relevant...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Short-Cut-Piping-Costs_2814.html
February 1, 2006
    Piping-flexibility and stress analysis are required in the design of most piping systems before the piping is installed in a chemical-process or other plant. It is intended to ensure the safety of the plant and thus protect the interests of the owner and the general public. Owing to the availability of powerful computer software packages, the analysis has become simple and routine. However...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Stress-Analysis-for-Piping-Systems-Resting-on-Supports_2795.html
February 1, 2006
    In pneumatic conveying systems that operate under high positive pressure, it is common wisdom that as the downstream end is approached, the diameters of the pipeline segments should be larger. Air (or other conveying gas) is compressible, so if a single-diameter pipeline is instead used, the gas velocity will reach very high values. If the conveyed material is abrasive, the consequence can be...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Pneumatic-Conveying-Before-Stepping-the-Line-Look-Into-Air-Extraction_2813.html
January 1, 2006
    Leakage costs industry millions of dollars every year. For example, a few small leaks in a facility using air at 100 psig, with an electric consumption cost of about 6¢/kWh, can waste more than $22,000 annually. Delaying the replacement of a leaking $100 steam trap could waste $50 per week; since an average facility typically has hundreds of steam traps throughout its operations, leaking...
http://www.che.com/processing_and_handling/liquid_gas_and_air_handling/piping_and_tubing/Avoid-Leakage-in-Pipe-Systems_2812.html
Pages: « Previous  1 2 3 4 5 6 [7]

Get more from Che.com
Get email updates in your inbox

 

Subscribe to:
Chemical Engineering Magazine

Chemical Engineering Magazine and Archives

Plant Cost Index

Join us on... Twitter LinkedIn

LinkedIn Groups

Our LinkedIn group is now over 21,000 members strong!

  1. Join other CPI professionals from all over the globe and share best practices, expertise, concerns and more.
  2. Provide feedback to Chemical Engineering Editors


Current members represent Worley Parsons, DuPont, SABIC, Fluor, Air Products, LyondellBasell, Nalco, Dow Chemical, Dow Corning, BASF, Jacobs Engineering, ExxonMobil, Shell, Chevron and more.

Join Now



We also offer the following subgroup for more targeted discussions:

Tools
Search the Buyers' Guide

Plant Cost Index

Facts at Your Fingertips (archive)

Ask the Experts

Back Issues
X
To access this area, please log in or create an account.
Username:
Password:
Forgot your password?
Request it now.
Processing...